(414) 279-5510 Call Tool Box Towing · Glendale, Milwaukee County
A loaded job box that has to be on the next Glendale site by morning, a 1,000-lb gang box between yards, a rolling mechanic’s cabinet relocating shops, or a new chest from the dealer — MKE Towing & Recovery hauls jobsite tool boxes, gang boxes, and rolling cabinets on flatbed and rollback trailers, fully insured. Forklift- or winch-loaded at the rated points, strapped and chained — never dragged. ~32-min typical Glendale response, flat price quoted before we roll.
Job boxes, gang boxes & roll cabs★ 4.3 · 373 reviews Flat price quoted first Licensed & Insured
Flat price quoted before a truck rolls — we show the factors, never fabricate a number. COI on request.
Need a tool box or gang box moved in Glendale? MKE Towing & Recovery hauls jobsite job boxes, gang boxes, and rolling tool cabinets — loaded or empty — on flatbed and rollback trailers, fully insured. We forklift- or winch-load at the rated points, strap and chain it down, and run it to the next site, the shop, or the yard. Glendale-area dispatch, ~32-minute typical response, scheduled moves any time, and a flat price quoted before we roll. Call (414) 279-5510.
A jobsite without its tools is a crew standing around. Tell dispatch the box type, the rough weight, and whether it’s loaded — a real Glendale dispatcher answers live and we bring the forklift or winch the first time.
Local to Glendale
Here's how we run tool box transport in Glendale, Milwaukee County — the corridors we run, the industrial areas we serve, and how fast a rig reaches you.
Weekday peaks (roughly 7–9 AM and 4–6 PM) load I-43 — the North-South Freeway — through Glendale at Exits 77 to 80, backing up the Port Washington Road and Silver Spring Drive approaches to Bayshore Town Center. The five-way where the Milwaukee River Parkway meets Silver Spring Drive is uncontrolled, as are the Port Washington & Green Tree and Range Line & Good Hope crossings — prime fender-bender geometry. Weekends and the holiday shopping season push the pressure onto Port Washington Road and the Bayshore parking garages. WisDOT work along the I-43 corridor can keep the Silver Spring, Good Hope and Hampton ramps shifting, so we check current conditions on the call.
Dispatch runs out of our South Side Milwaukee yard, about 10 miles out, covering Milwaukee & Waukesha counties. You get a live ETA, not a guess.
Across Glendale, tool-box calls come from the construction sites, shops, and supply yards around Green Bay Avenue (WIS-57) light-industrial corridor, Port Washington Road commercial/industrial corridor, and Sprecher Brewery / Johnson Controls campus area — gang boxes moving to the next job, loaded roll cabs relocating between shops, and dealer deliveries. We forklift- and winch-load them and run them to the next site, the shop, or the yard — anywhere from Bayshore, Glen Hills, and Kletzsch Park area to the I-43 (North-South Freeway) shoulder. Coverage runs Bayshore, Glen Hills, and Kletzsch Park area and everywhere in between — a live Glendale dispatcher gives you a real ETA and a flat price first.
Winter ice & lake-effect snow (Nov–Mar) — the I-43 ramps at Silver Spring, Good Hope and Hampton freeze first
Wisconsin's legal limits on the interstate run 8'6" wide, 13'6" high, and 80,000 lb gross — anything over needs a WisDOT oversize/overweight permit, and we pull it.
Wisconsin's spring thaw brings posted weight restrictions (“frost laws”) on local roads from roughly March into April — we know which routes are posted and plan the legal way in.
Early morning is when Glendale roads bite: fog settles in on occasion, and the I-43 overpass and river-bridge decks glaze over before the surface streets do. A few miles off Lake Michigan as an inner North Shore suburb, the city sits squarely in lake-effect snow band territory. Expect cold, snow-heavy winters and warm summers — a continental, humid climate the nearby lake softens somewhat.
Serving Glendale ZIP codes: 53209 · 53211 · 53212 · 53217
Sound familiar?
A loaded gang box has to be on the next Glendale-area site by morning so the crew has its tools. We forklift it on and run it across the metro — scheduled, insured.
A mechanic’s roll cab loaded with tools, too heavy and top-heavy to push up a ramp. We winch or lift it on and strap it so the drawers stay put.
A new Knaack, JOBOX, or chest from the dealer or store to your shop or site. Delivered, set where you want it, COI on request.
A field box full of tools and gear that’s pushing 1,000+ lb. We lift at the rated forklift pockets or lift eyes — carried, not dragged.
A job wrapping up and the boxes have to come off the site. We haul them back to the yard or the next project, loaded or empty.
Bought or sold a box, or a shop full of cabinets. We pick up, secure, and deliver — a single box or a trailer load.
Running or not, we load it
An empty rolling cabinet rolls up a ramp or onto a liftgate, casters locked, then strapped upright so the drawers stay shut on the road.
Call dispatch — (414) 279-5510A loaded job box or gang box is forklift-loaded at the fork pockets or lifted by the rated eyes, then chained at the rated points — carried, never dragged.
Call dispatch — (414) 279-5510An extra-long or extra-heavy box rides a flatbed or Landoll sized to the weight, rigged at the rated points so nothing shifts.
Call dispatch — (414) 279-5510Do you handle mine? Almost certainly.
Steel jobsite gang boxes and job boxes (Knaack, JOBOX, Greenlee, DeWalt) — forklift-loaded at the fork pockets or lifted by the rated eyes, loaded or empty.
Mechanic’s roll cabs and top chests (Snap-on, Mac, Matco, Husky, Milwaukee) — casters locked, drawers latched, strapped upright so nothing shifts.
Field tool cribs, piano boxes, and site storage chests — loaded on a flatbed or rollback and chained at the rated points.
A box stacked full and pushing 1,000+ lb, or an extra-long site box. We size the trailer and rigging to the real weight — carried, never dragged.
What tool box transport covers
A tool box is carried and strapped, not dragged. We lift at the rated fork pockets or lift eyes, secure it upright at rated points, and right-size the trailer to the loaded weight.
A picker, not a promise — the trailer and rigging are confirmed from the box type, the loaded weight, and the site access on the call.
Secured, not dragged
Strapped and chained at the box’s rated lift eyes or skid, sized to the loaded weight — never a strap and a guess.
Forklift-loaded at the fork pockets or lifted by the rated eyes — a loaded steel box is carried on the deck, not dragged across the lot.
On a rolling cabinet the casters are locked and the drawers latched so nothing rolls or slides on an I-43 (North-South Freeway) haul.
Kept upright and the trailer sized to the loaded weight, so a top-heavy box rides flat and secure.
What it costs & why
A Glendale tool box haul is a flat price quoted before we roll — an empty rolling cabinet across town is the low end; a 1,000-lb loaded gang box that needs a forklift and a flatbed is the high end. We show the factors and the flat price holds.
The flat price covers the dispatch and the haul, quoted before a truck leaves. Forklift or liftgate loading, extra weight, and tight access are itemized and confirmed up front — no lowball-then-add-on.
Get your Glendale priceBallpark it now — live estimate
An empty cabinet and a box stacked full of tools are different lifts — the trailer and rigging are sized to the real weight.
A forklift lift at the pockets is quick; a winch, liftgate, or stair-roll is billed by the work it takes.
A curbside pickup is straightforward; a tight gate, an upper floor, or a long haul across Milwaukee County adds time and gear.
A planned move during the day is the low end; an after-hours or rush move runs a premium — quoted up front.
Getting help in Glendale
Tell dispatch the box type, rough weight, and whether it’s loaded. We confirm the flatbed or rollback, forklift or winch, and rigging before a truck leaves Glendale.
We spot the trailer, set the ramps or get the forklift in position, and clear the loading path.
We lift at the rated fork pockets or eyes, or winch a rolling cabinet up the deck — a loaded box is carried, never dragged.
Drawers latched, casters locked, strapped upright and chained at the rated points, sized to the loaded weight.
To the next site, the shop, or the yard — set where you want it, with clean paperwork and a COI for your file.
Why Glendale crews & shops call MKE
A real ETA from the closest unit, or a scheduled window for a planned move — not a canned promise.
Fork pockets, lift eyes, winch, or liftgate — we lift and load to the box’s rated points, never a guess and a strap.
Years of equipment and jobsite moves across Milwaukee and Waukesha. Licensed & Insured — USDOT# 4272551.
Certificate of insurance on request, with consolidated billing on contractor and dealer accounts.
Tool Box Towing in Glendale
Same-day in most cases — Glendale is ~10 road miles from our yard, and boxes move between its repair shops (Car-X, Midas, Habhegger), the Green Bay Avenue maintenance shops, and home garages in Glen Hills all the time. Call (414) 279-5510 24/7.
Tool boxes run $100–$150 per unit, up to four boxes per trip, quoted flat before we roll. Size, weight and stairs-vs-dock access set where in that range a box lands — you hear the number on the call. Call (414) 279-5510.
Usually yes — most roll-aways move loaded with drawers locked and banded, winched up the ramp and strapped upright so nothing shifts. Monster triple-banks past the weight limit get the liftgate-and-crane treatment instead. Tell dispatch the brand and rough size. Call (414) 279-5510.
Yes — tech-to-new-shop moves are routine, scheduled around shop hours when that matters, box photographed at pickup and delivered locked. Up to four boxes ride one trip, so a whole bay can move at once. Call (414) 279-5510.
Nearby
Need something else?
One call reaches a live dispatcher — flatbed or rollback, forklift- or winch-loaded at the rated points, strapped and chained, a ~32-min typical Glendale response, and a flat price quoted before we roll.