(414) 279-5510 Call Scissor Lift Towing · Butler, Waukesha County
A rough-terrain lift sunk in mud on a Butler site, a slab lift due on a job Monday, a unit that won't power up to drive onto the deck, or a rental that needs picking up — MKE Towing & Recovery hauls slab and rough-terrain scissor lifts on low-angle Landoll, tilt-deck & flatbed trailers, fully insured. Driven on if it runs, winch-loaded if it's dead, recovered if it's stuck or tipped. Oversize permits handled, ~30-min typical response on downtime calls, flat price quoted before pickup.
Slab & rough-terrain lifts★ 4.3 · 373 reviews Flat price quoted first Licensed & Insured
Flat price quoted before pickup — we show the factors, never fabricate a number. COI on request.
Need a scissor lift moved, recovered, or delivered in Butler? MKE Towing & Recovery hauls slab (electric) and rough-terrain lifts — driven on if it runs, winch-loaded if it's dead, recovered if it's stuck or tipped — on low-angle Landoll, tilt-deck & flatbed trailers, fully insured. We pull any oversize permit for wide RT units and confirm a flat price before pickup. Call (414) 279-5510.
An idle crew and a downed lift both cost money by the hour. Tell dispatch the make, model, weight, and whether it drives or has to be winched — a real Butler dispatcher answers live and we bring the right low-angle deck the first time.
Local to Butler
What a crew that works Butler every week pays attention to: the corridors we run, the industrial areas we serve, and how fast a rig reaches you.
For a village barely three-quarters of a square mile, Butler's pattern is simple: Hampton Avenue (CTH KK, continuing as CTH EE) carries the east–west movement and West Silver Spring Drive (CTH VV) — the only signed truck route through town — takes the north–south and freight load, both feeding N 124th Street. The one signalized major crossing is Hampton Avenue & N 124th Street; the Hampton Avenue & Hampton Road junction a block west is uncontrolled, the kind of geometry that produces low-speed fender-benders. The other Butler variable is the rail line the village was built around: when a train works the yard, cars stack at the grade crossings until it clears.
Live ETA confirmed when you call — Butler sits 14 road miles from our yard, and we cover both counties.
Most Butler scissor lift calls start around Silver Spring Drive (CTH VV) truck-route corridor, Hampton Avenue corridor (CTH KK / CTH EE), and 124th Street corridor: RT lifts mired in soft ground, slab lifts coming off an indoor job, and rental delivery and pickup. Whether it sits near Hampton Avenue commercial node (CTH KK) or out on Silver Spring Dr (CTH VV, truck route), Hampton Ave (CTH KK / CTH EE), and Hampton Rd (CTH K), we move them on a low-angle deck so a low-clearance lift never high-centers. From Frontier Park (Menomonee River) out to Silver Spring Drive (CTH VV) truck-route corridor, Hampton Avenue corridor (CTH KK / CTH EE), and 124th Street corridor, one Butler call covers the scissor lift move — insured, flat-priced, any hour.
Winter ice & snow (Nov–Mar) on Silver Spring Drive (CTH VV) and the Hampton Avenue approaches
Wisconsin's legal limits on the interstate run 8'6" wide, 13'6" high, and 80,000 lb gross — anything over needs a WisDOT oversize/overweight permit, and we pull it.
Wisconsin's spring thaw brings posted weight restrictions (“frost laws”) on local roads from roughly March into April — we know which routes are posted and plan the legal way in.
Butler's weather hazards are compact, like the village itself — a built-up grid along the Menomonee River where freeze-thaw pavement damage, winter snow and the occasional pocket of river-corridor fog make up most of the driving-hazard list. The climate is Milwaukee-metro standard: humid continental, cold and snowy winters opposite warm, muggy summers.
Serving Butler ZIP codes: 53007
Sound familiar?
Drop a slab lift at a Butler job site Monday, pick it up when the job wraps. We coordinate with the rental yard on a low-angle Landoll, insured.
An RT lift must be on the next Butler-area site by morning. Drive on or winch, chain at the chassis points, and run it across the metro.
A flat battery, hydraulics down, or a controller fault. We winch it on with a rated line, platform pinned, and haul it to the shop or dealer.
An RT sunk in soft ground or tipped on a grade — that's a recovery, not a haul. We winch it out or right it, inspect, and load safe.
A unit in for service and back, or a dealer delivery. Slab or RT, every major brand, COI on request.
A lift stuck on a low-clearance level or an upper deck. A low-profile trailer and the right rigging get it out — no scraping.
Running or not, we load it
A running lift drives up a low-angle deck under power — low ground clearance means a steep ramp would high-center it, so we always load it flat.
Call dispatch — (414) 279-5510A dead lift is winch-loaded on a rated line, platform fully lowered and pinned, then chained at the chassis tie-down points.
Call dispatch — (414) 279-5510Stuck or tipped, we winch it out or right it with rated rigging on a plan, inspect it, then load and secure — never forced.
Call dispatch — (414) 279-5510Do you handle mine? Almost certainly.
Indoor electric lifts, roughly 1,500–6,000 lb — narrow, they drive onto a low-angle Landoll or flatbed and usually need no permit.
4WD outdoor units, roughly 6,000–10,000 lb — they ride a Landoll or flatbed, and the wider decks may need an oversize permit we pull.
Large RT units around 11,000–13,000+ lb and up to ~8 ft wide move oversize on a heavy Landoll with a permit and flags.
A battery or hydraulic failure, a controller fault, or a tipped or stuck unit — winched on with a rated line or recovered first. No machine is too dead to move.
What scissor lift transport covers
A scissor lift is loaded flat, not forced — low ground clearance high-centers on a steep ramp, so we use a low-angle deck and secure to rated chassis points every time.
A picker, not a promise — the final trailer and any permit are confirmed from the exact weight, width, height, and route on the call.
Secured, not dragged
The platform is fully lowered and the scissor stack pinned so nothing rises or settles on a Silver Spring Dr (CTH VV, truck route) haul.
Grade-70 chain at the chassis tie-down points front and rear, rated to the real weight — never a strap and a guess.
The battery is disconnected and the controls locked out so nothing creeps or powers up in transit.
Loaded on a low-angle deck so a low-clearance lift never high-centers — flat and secure, not forced up a ramp.
What it costs & why
A Butler scissor lift haul is a flat price quoted before pickup — a slab lift driven onto a trailer for a local move is the low end; a large RT unit recovered and moved oversize is the high end. We show the factors and the flat price holds.
The flat price covers the dispatch and haul, quoted before a truck leaves. Recovery and any oversize permit are itemized and confirmed up front — no lowball-then-add-on.
Get your Butler priceBallpark it now — live estimate
A 2,800-lb slab lift and a 13,000-lb large RT unit are different hauls — the deck and rigging are sized to the real weight.
A running lift drives on fast; a dead one is winch-loaded and billed by the work it takes.
A wide RT unit over legal width gets the WisDOT permit and flags — itemized, never a surprise.
Soft ground, a tight gate, a parking deck, or after-hours work adds time over a clean curbside load.
Getting help in Butler
Tell dispatch the make, model, weight, slab or RT, and whether it drives. We confirm the Landoll or flatbed, rigging, and any permit before a truck leaves Butler.
A stuck or tipped lift is winched out or uprighted with rated rigging before anything goes on the deck.
Running units drive up a low-angle deck; dead units come up on a rated winch line. We never high-center it on a steep ramp.
Platform lowered and pinned, battery disconnected, grade-70 chain at the chassis points, sized to the real weight.
To the next site, yard, dealer, or shop — with clean paperwork and a COI for your file.
Why Butler rental yards & GCs call MKE
A real ETA from the closest unit on a downtime or recovery call — not a canned promise.
Low-angle Landoll and tilt-decks load low-clearance lifts flat — driven or winched, never forced.
Years of lift and equipment moves across Milwaukee and Waukesha. Licensed & Insured — USDOT# 4272551.
Certificate of insurance on request, with consolidated billing on rental, contractor, and dealer accounts.
Scissor Lift Towing in Butler
Same-day for most moves from our South Side yard ~14 miles out — warehouse rack work along the industrial corridor, facility maintenance at the Western States and MRPC campuses, and build-outs across the village. We slot into your dock window. Call (414) 279-5510 24/7.
Lift moves start at $150 for units up to 10,000 lbs and $250 for 10–15,000 lbs, quoted flat before we roll. Electric slab lifts sit at the low end; rough-terrain units ride a Landoll and any wide-load permit is priced up front. Call (414) 279-5510.
Yes — we deliver to the dock or the exact bay your facilities team names, from the West Silver Spring Drive (CTH VV) warehouses to the corridor plants. Electric lifts roll off under their own power; dead ones get winched. Call (414) 279-5510.
Slab electric scissors (19–40 ft), rough-terrain 4WD units, and vertical mast lifts. Slabs ride a rollback; RT lifts go Landoll or flatbed, drive-on or winched. Tell dispatch the model and platform height so the right trailer comes. Call (414) 279-5510.
Yes — end-of-job rental returns to any metro yard, quoted flat, with condition photos at pickup if your PM wants them. One call and the lift is off your Butler site and off your invoice. Call (414) 279-5510.
Nearby
Need something else?
Forklifts, telehandlers & MHE, running or dead.
Learn moreDrive-on or winch-loaded, every frame size.
Learn moreDozers, loaders & excavators on lowboy & RGN.
Learn moreTowable, skid & standby gensets, hauled or recovered.
Learn moreOne call reaches a live dispatcher — Landoll, tilt-deck, or flatbed, drive-on or winch-on, recovery for stuck and tipped units, oversize permits handled, a ~30-min typical response on Butler downtime calls, and a flat price quoted before pickup.