(414) 279-5510 Call Engine Towing · Butler, Waukesha County
A crate engine inbound from a supplier, a core due at the machine shop, a marketplace long-block with no forklift on either end, or a complete pull changing shops — MKE Towing & Recovery moves engine blocks and crate engines on flatbeds with winch and liftgate loading, fully insured. The first question is never the weight — it’s how the engine can be loaded: on a pallet, loose with a forklift on site, or loose with no equipment at all. Three different jobs, and the quote prices the right one. ~30-min typical Butler response, exact price online before we roll.
Crate engines, blocks & cores★ 4.3 · 373 reviews Exact price online first Licensed & Insured
Priced by movability first, weight band second — an over-range industrial engine gets a dispatcher’s custom price, never a fake online number.
MKE Towing & Recovery — open 24/7. Need an engine moved in Butler? MKE Towing & Recovery transports crate engines, bare blocks, cores, and complete pulls — most crated and palletized engines run 500–3,000 lb — palletized or loose, with winch and liftgate loading when there’s no forklift on site. Strapped so there’s no roll, fully insured, delivered to your shop or builder. ~30-minute typical Butler response, same-day often possible where truck and site access allow, exact price online in about 60 seconds. Call (414) 279-5510.
Instant quote — free, no phone call needed
No phone call needed to see the number — the calculator prices your Butler job with the same engine our dispatchers use and hands you a quote reference (Q-XXXXXXXX) in about 60 seconds. Heavy jobs that need specialty rigging or a recovery plan get a dispatcher's confirmation call before we roll.
Tell dispatch what the engine is sitting on — a pallet, a stand, the floor — and what the site can lift with. That one answer sets the whole job, and a real Butler dispatcher prices it straight.
Local to Butler
Every engine transport call in Butler, Waukesha County gets planned around the delivery routes we run, where the shops cluster, and how the load goes on the deck.
For a village barely three-quarters of a square mile, Butler's pattern is simple: Hampton Avenue (CTH KK, continuing as CTH EE) carries the east–west movement and West Silver Spring Drive (CTH VV) — the only signed truck route through town — takes the north–south and freight load, both feeding N 124th Street. The one signalized major crossing is Hampton Avenue & N 124th Street; the Hampton Avenue & Hampton Road junction a block west is uncontrolled, the kind of geometry that produces low-speed fender-benders. The other Butler variable is the rail line the village was built around: when a train works the yard, cars stack at the grade crossings until it clears.
Live ETA confirmed when you call — Butler sits 14 road miles from our yard, and we cover both counties.
Across Butler, engine calls come from the machine shops, parts suppliers, and home garages — crate engines inbound from suppliers, cores due at the machine shop, and marketplace buys with nothing on site to lift them. Whether it sits near Hampton Avenue commercial node (CTH KK) or out on Silver Spring Dr (CTH VV, truck route), Hampton Ave (CTH KK / CTH EE), and Hampton Rd (CTH K), we bring the winch, the liftgate, and the pallet, and move them palletized or loose to your shop or builder. Coverage runs Silver Spring Drive (CTH VV) truck-route corridor, Hampton Avenue corridor (CTH KK / CTH EE), and 124th Street corridor and everywhere in between — a live Butler dispatcher gives you a real ETA and a flat price first.
Cold months don’t slow Butler engine moves — winter is project season, with cores headed to the machine shop and crate engines that can’t sit on a dock in the snow. The liftgate works any month.
Wisconsin's legal limits on the interstate run 8'6" wide, 13'6" high, and 80,000 lb gross — anything over needs a WisDOT oversize/overweight permit, and we pull it.
Wisconsin's spring thaw brings posted weight restrictions (“frost laws”) on local roads from roughly March into April — we know which routes are posted and plan the legal way in.
Butler's weather hazards are compact, like the village itself — a built-up grid along the Menomonee River where freeze-thaw pavement damage, winter snow and the occasional pocket of river-corridor fog make up most of the driving-hazard list. The climate is Milwaukee-metro standard: humid continental, cold and snowy winters opposite warm, muggy summers.
Serving Butler ZIP codes: 53007
Sound familiar?
A new crate engine landed at a depot and your shop has no truck for it. We pick it up on the pallet, check the banding, and deliver it inside the door.
A bare block or core headed out for machining and back. Chain on cast iron where it’s rated, padded straps where it isn’t — and the round trip runs on your schedule.
A long-block bought off a listing, sitting in a seller’s garage with nothing to lift it. We bring the winch, the liftgate, and the pallet — the loading problem is ours.
A build changing hands between shops, or an engine following a car to a new builder. Scheduled, insured, reference number on the paperwork.
The project engine that outgrew the garage — or the estate sale that included one. Liftgate down the driveway, strapped upright, delivered where you point.
Marine, generator, and industrial engines past the listed range get a dispatcher’s custom price and the right equipment — honestly quoted, not guessed online.
Running or not, we load it
A palletized engine with the banding intact moves by pallet jack and liftgate or forklift. We check pallet integrity first — stringers, deck boards, banding — because the pallet is the load path.
Call dispatch — (414) 279-5510If the pickup has a forklift, we bring a pallet and strapping, the site sets it on, and we secure it so there’s no roll. Quick — and the quote prices it that way.
Call dispatch — (414) 279-5510No forklift on either end is the third — and hardest — version of the job: winch and liftgate loading at a controlled deck angle with rated equipment. Flag it in the quote and the price includes it.
Call dispatch — (414) 279-5510Do you handle mine? Almost certainly.
New crate engines stay in the crate, on the pallet — banding and pallet condition checked before it moves an inch, because a cracked stringer fails at the worst time.
Short blocks, long blocks, and cores headed to machining — palletized if they aren’t already, strapped so machined surfaces never take a chain.
A complete engine, sometimes with the transmission still hung — heavier and more awkward than the bare block, and priced by what it actually takes to load it.
Most crated and palletized engines run 500–3,000 lb. Marine, generator, and industrial units past the online range escalate to a dispatcher’s custom price — a real number from a person.
What engine transport covers
An engine is freight, not a vehicle — so the flow skips every car question and asks what actually prices the move: how it loads, what it weighs, where it’s going.
The final loading plan is confirmed from what it’s sitting on, what the site can lift, and the real weight on the call — a picker, not a promise.
Secured, not dragged
Stringers, deck boards, and banding get checked before the engine moves — the pallet is the load path, and a doubtful one gets re-palleted, not trusted.
Chain binds to cast iron at rated points; anything machined, threaded, or aluminum takes padded straps. The metal decides, not habit — and the crate or pallet is strapped so there’s no roll.
Oil and coolant come out before the road — a full crankcase is a spill, a shifted load, and a mess at the Silver Spring Dr (CTH VV, truck route) off-ramp. A drained block rides clean and stable.
Winch and liftgate loading at a controlled deck angle, rigged to the load — on the deck and off it under control, never dropped the last few inches.
What it costs & why
No dollar figures printed here — the honest number depends on movability first (pallet, forklift on site, or no equipment), then the weight band, the measured route, and the time of day. The calculator above walks those exact questions and shows the itemized price in about 60 seconds.
Say what it’s sitting on and what the site can lift, and the quote prices the right version of the job — winch and liftgate loading included up front when there’s nothing to lift with. Over-range industrial engines get a dispatcher’s custom price.
See my Butler pricePalletized, loose with a forklift on site, or loose with no equipment — three different jobs, and the single biggest driver of the price.
A four-cylinder long block and a big-block complete pull ride the same deck differently — the quote sizes crew and equipment to the band.
Priced on the actual miles — a cross-town shop run and a cross-Waukesha County supplier pickup are different numbers, shown before you commit.
A scheduled daytime run is the low end; a night or weekend move runs a premium the quote shows up front.
Getting help in Butler
Supplier dock, machine shop, garage, driveway — the route is measured, not zoned.
Pallet, forklift on site, or nothing to lift with — plus the weight band. No car questions; the flow asks only what prices the move.
Oil and coolant out before pickup where possible — we’ll walk you through it. A sealed new crate ships as the manufacturer packed it.
The exact number with a Q-XXXXXXXX reference the dispatcher picks right up — hand it over and we start where you left off.
Pallet checked, strapped by surface so there’s no roll, delivered to your shop or builder — COI for the file.
Why Butler builders & shops call MKE
A real ETA from the closest unit — and same-day is often possible where truck and site access allow.
Palletized, forklift-on-site, and no-equipment loads are priced as the different jobs they are — never one fake flat rate.
Years of freight and equipment moves across Milwaukee and Waukesha. Licensed & Insured — USDOT# 4272551.
Your online quote carries a reference number — and shops moving cores every week get scheduled runs and consolidated billing.
Engine Towing in Butler
Downtime calls get the nearest truck — typically 30 minutes out for Butler, inside a 22–42 window that traffic and weather set. Booked moves go on the calendar for any day. Call (414) 279-5510 and you'll hear the live ETA, not an estimate.
Engine transport in Butler is priced by movability first — palletized, loose with a forklift on site, or loose with no loading equipment — then the weight band, the measured route, and the time of day. The calculator on this page walks those exact questions and itemizes the price in about a minute, free — or call (414) 279-5510 and hear the same number.
We stage and move equipment along Butler's freight corridors — the Silver Spring Dr (CTH VV, truck route), Hampton Ave (CTH KK / CTH EE), and Hampton Rd (CTH K) spine and the yards around Butler industrial corridor (Silver Spring Dr / CTH VV truck route), Western States Envelope & Label Company (Butler), and MRPC molded rubber & plastics campus — to your site, a repair shop, or wherever the unit needs to go. Loads past legal width, height, or weight move on a WisDOT oversize/overweight permit with a surveyed route, and the widest or heaviest add pilot-car escorts — our paperwork, not yours. Call (414) 279-5510.
Yes — that’s the job the winch and liftgate exist for. Flag “no loading equipment” in the quote and the price includes controlled-angle winch loading at pickup and a liftgate set-down at delivery.
Yes — oil and coolant come out before it rides. A full crankcase shifts weight and spills on the deck; a drained block is a clean, stable load. Sealed new crate engines ship as the manufacturer packed them.
Both, decided by the surface: chain binds to cast iron at rated points, and anything machined, threaded, or aluminum gets padded straps. The crate or pallet is strapped so there’s no roll, and the block arrives the way the machine shop needs it.
Constantly — a long-block in a seller’s garage is a classic call, and same-day often works where the truck and site access line up. Send the weight, the rough size, and both locations, and dispatch quotes a window with the price.
Most crated and palletized engines run 500–3,000 lb. Marine, generator, and industrial engines past the online range get a dispatcher’s custom price — the quote says so honestly instead of showing a number we can’t stand behind. Call (414) 279-5510.
Answers reviewed July 2026 — pricing model, hours and ETAs are checked quarterly.
Jump back to the calculator — free, no phone call, and your quote reference (Q-XXXXXXXX) holds your place with dispatch.
Nearby
Need something else?
Winch & tilt-deck loading onto your trailer or off a carrier.
Learn moreThe truck the engine came out of — recovered too.
Learn moreThe shop’s boxes and cabinets, moved the same trip.
Learn moreGensets & skid units, hauled or recovered.
Learn morePickup, drop-off, and how it loads — the calculator itemizes the price in about 60 seconds, and a live dispatcher at (414) 279-5510 picks up your Q-reference. Shops with recurring core runs: ask about scheduled transports and consolidated billing.