(414) 279-5510 Call Bobcat Towing · Glendale, Milwaukee County
An S-Series loader due back at the rental counter, a T-Series compact track loader won at auction, an E-Series mini excavator headed in for dealer service, or a machine that quit mid-job with the auger still hung — MKE Towing & Recovery moves Bobcat-brand compact equipment on flatbeds and equipment trailers, fully insured. Chained at the lugs, attachment down or riding secured on its own, winch loading built into the quote for dead machines. ~32-min typical response on Glendale calls, exact price online before we roll.
S, T & E Series + attachments★ 4.3 · 373 reviews Exact price online first Licensed & Insured
Sized by the machine’s weight band with winch loading included when you flag it — an over-range machine gets a dispatcher’s custom price, never a fake online number.
MKE Towing & Recovery — open 24/7. Need a Bobcat moved in Glendale? MKE Towing & Recovery hauls Bobcat-brand compact equipment — S-Series skid-steer loaders, T-Series compact track loaders, and E-Series mini excavators, attachments handled — on flatbeds and equipment trailers, fully insured. Most compact machines run 5,000–10,000 lb; we confirm weight and balance, chain at the lugs, and control it on and off the deck. Winch loading for dead machines, ~32-minute typical Glendale response, exact price online in about 60 seconds. Call (414) 279-5510.
Instant quote — free, no phone call needed
Answer the sizing questions dispatch would ask anyway, and the exact Glendale price is on screen in about 60 seconds — itemized, with a reference number (Q-XXXXXXXX) you can hand the dispatcher. If the move needs specialty rigging or permits, dispatch confirms the details by phone before a truck leaves.
Tell dispatch the model — S-Series loader, T-Series track machine, or E-Series mini excavator — what attachment is on it, and whether it starts. A real Glendale dispatcher answers live, confirms weight and balance, and the winch rides along if it’s dead.
Local to Glendale
Here's how we run Bobcat transport in Glendale, Milwaukee County — the corridors we run, the industrial areas we serve, and how fast a rig reaches you.
Weekday peaks (roughly 7–9 AM and 4–6 PM) load I-43 — the North-South Freeway — through Glendale at Exits 77 to 80, backing up the Port Washington Road and Silver Spring Drive approaches to Bayshore Town Center. The five-way where the Milwaukee River Parkway meets Silver Spring Drive is uncontrolled, as are the Port Washington & Green Tree and Range Line & Good Hope crossings — prime fender-bender geometry. Weekends and the holiday shopping season push the pressure onto Port Washington Road and the Bayshore parking garages. WisDOT work along the I-43 corridor can keep the Silver Spring, Good Hope and Hampton ramps shifting, so we check current conditions on the call.
Live ETA confirmed when you call — Glendale sits 10 road miles from our yard, and we cover both counties.
In Glendale, the calls cluster along I-43 (North-South Freeway), WIS-57 (N Green Bay Ave), and WIS-190, plus the yards around Green Bay Avenue (WIS-57) light-industrial corridor, Port Washington Road commercial/industrial corridor, and Sprecher Brewery / Johnson Controls campus area — rentals due back on the clock, auction and dealer pickups, and machines dead mid-job with the attachment still on. Whether it sits near Bayshore Town Center or out on I-43 (North-South Freeway), WIS-57 (N Green Bay Ave), and WIS-190, we chain them at the lugs, handle the attachment, and run them to the counter, the dealer, or the next site. Whether it sits near Bayshore Town Center or over by Bayshore, Glen Hills, and Kletzsch Park area, we bring the trailer to it and strap it to rated points.
Winter ice & lake-effect snow (Nov–Mar) — the I-43 ramps at Silver Spring, Good Hope and Hampton freeze first
Wisconsin's legal limits on the interstate run 8'6" wide, 13'6" high, and 80,000 lb gross — anything over needs a WisDOT oversize/overweight permit, and we pull it.
Wisconsin's spring thaw brings posted weight restrictions (“frost laws”) on local roads from roughly March into April — we know which routes are posted and plan the legal way in.
Early morning is when Glendale roads bite: fog settles in on occasion, and the I-43 overpass and river-bridge decks glaze over before the surface streets do. A few miles off Lake Michigan as an inner North Shore suburb, the city sits squarely in lake-effect snow band territory. Expect cold, snow-heavy winters and warm summers — a continental, humid climate the nearby lake softens somewhat.
Serving Glendale ZIP codes: 53209 · 53211 · 53212 · 53217
Sound familiar?
The rented machine is due back and the trailer fell through. Yard-to-site or site-to-yard — we load at the lugs and have it at the counter before the next billing day.
Won a T-Series at auction or bought a used S-Series off a listing. Have the release ready, confirm site access, and the quote reference keeps the paperwork clean.
A new machine from the dealer to your site, or one headed in for service or warranty work. Scheduled, insured, COI for the file.
A machine that won’t start with the job half done. Winch loading is a first-class part of the quote — controlled angle, rated line, no drama.
Buckets, augers, pallet forks, breakers — on the machine or moving on their own. Standard attachments ride lowered flat; tall or wide ones detach and ride secured separately.
The machine has to be on the next Glendale-area site by morning — and set down where the crew needs it, not just dropped at the gate.
Running or not, we load it
A running machine loads under power at the right deck angle — attachment down, transport lock set, grade-70 chain at the lugs, four-point, so it can’t shift, tip, or score its own finish.
Call dispatch — (414) 279-5510Flag it when you price the move and winch loading is included up front — a controlled angle up the tilt-bed on a rated line. A dead Bobcat is a routine load, not a surcharge surprise.
Call dispatch — (414) 279-5510A machine parked somewhere tight or bogged on site gets the approach planned before the truck rolls — jobsite access width checked, recovery gear on the truck, then loaded and secured.
Call dispatch — (414) 279-5510Do you handle mine? Almost certainly.
Bobcat’s wheeled loaders, small frame to large. Most compact machines run 5,000–10,000 lb and carry it nose-heavy — we confirm weight and balance before the deck angle is set.
Rubber-tracked machines load slow on the steel deck to protect the undercarriage, transport lock set, chained at the lugs the same four ways.
Compact excavators ride with the house straight and the boom lowered to the deck, blade down, chains at the machine’s rated points — never loose.
Buckets and forks ride lowered flat; augers, breakers, and wide snow attachments detach and ride chained on their own. A machine over the listed range gets a dispatcher’s custom price — said honestly, up front.
What Bobcat transport covers
One honest note first: Bobcat is a brand, and this page is about the machines it builds. Run a Case, Cat, Kubota, or Deere instead? Same trailers, same lug-point securement — see our skid steer transport page below.
The final trailer and rigging are confirmed from the model, the attachment, and the site access on the call — a picker, not a promise.
Secured, not dragged
Attachment down, grade-70 chain at the lugs — the rated attachment points built into the frame — front and rear, so nothing shifts, tips, or scores its own finish on an I-43 (North-South Freeway) haul.
Most compact machines run 5,000–10,000 lb and carry it nose-heavy. We confirm the weight and balance, rig to the machine, and control it on and off the deck.
A standard bucket or forks stays on, lowered flat to the deck; an auger, breaker, or wide attachment comes off and rides chained on its own — never swinging on the coupler.
A machine that won’t start comes up the tilt-bed on a rated line at a controlled angle — a first-class option in the quote, not an improvised drag.
What it costs & why
No price table here, because the honest number depends on the machine: the sizing answers (which series, which weight band), winch loading if it’s dead, the measured route, and the time of day. The calculator above prices all four in about 60 seconds — computed by the same live engine our dispatchers quote from.
Answer the machine’s sizing questions, say whether it starts, and the itemized price is on screen — winch loading included up front when you need it. Machines over the listed range get a dispatcher’s custom price instead of a number we can’t stand behind.
See my Glendale priceWhich machine and which weight band — a small-frame S-Series and a large T-Series are different trailers and different prices.
A dead machine loads by controlled winch, not luck — flag it in the quote and the price includes it from the start.
Priced on the actual pickup-to-drop-off miles, not a zone guess — a cross-town rental return and a cross-Milwaukee County dealer run price differently.
A scheduled daytime transfer is the low end; a night or weekend call runs a premium the quote shows before you commit.
Getting help in Glendale
Where the machine sits and where it’s going — the route is measured, not zoned.
Series, weight band, attachment. No car questions — equipment flows skip year/make/model and ask only what prices the move.
Winch loading is a first-class option — flag it and the price includes it up front, no on-site renegotiation.
The exact number on screen with a Q-XXXXXXXX reference — hand it to the dispatcher and we pick up right where you left off.
Chained at the lugs, attachment handled, delivered to the counter, the dealer, or the next site — COI for the file.
Why Glendale renters & machine owners call MKE
A real ETA from the closest unit on a dead-machine or rental-clock call — not a canned promise.
Skid-steer loaders, compact track loaders, and mini excavators — plus the attachments — moved by one crew.
Years of equipment moves across Milwaukee and Waukesha. Licensed & Insured — USDOT# 4272551.
Your online quote carries a reference number — and contractors moving machines every week get scheduled transports, live ETAs, and consolidated billing.
Bobcat Towing in Glendale
Glendale is about 10 road miles from our South Side Milwaukee yard, so a typical response on a downtime call is around 32 minutes (25–45 depending on traffic and weather). Scheduled moves are booked any time. A live dispatcher gives you a real ETA at (414) 279-5510.
Bobcat transport in Glendale is a flat price quoted before we roll — the machine’s sizing answers (series and weight band), winch loading if it’s dead, the measured route, and the time of day set it. The calculator on this page walks the same questions our dispatcher asks and shows the exact number in about 60 seconds — or call (414) 279-5510 and hear the same price.
We stage and move equipment along Glendale's freight corridors — the I-43 (North-South Freeway), WIS-57 (N Green Bay Ave), and WIS-190 spine and the yards around Green Bay Avenue (WIS-57) light-industrial corridor, Port Washington Road commercial/industrial corridor, and Sprecher Brewery / Johnson Controls campus area — to your site, a repair shop, or wherever the unit needs to go. Loads past legal width, height, or weight move on a WisDOT oversize/overweight permit with a surveyed route, and the widest or heaviest add pilot-car escorts — our paperwork, not yours. Call (414) 279-5510.
Yes. Winch loading is built into the quote: a controlled angle up the tilt-bed on a rated line, then chained at the lugs, four-point. A dead Bobcat is a routine load, not a complication.
Constantly — yard-to-site, site-to-yard, and auction lots. Have the release or receipt ready and confirm site access (gate width matters more than people expect); the quote reference number keeps the paperwork clean at both ends.
No — Bobcat is the brand this page is about, but we haul every skid-steer and compact-loader brand the same way: Case, Cat, Kubota, Deere, Takeuchi. Same trailers, same rated-point securement, same instant quote — see our skid steer towing page.
A standard bucket or pallet forks stays on, lowered flat to the deck. An auger, breaker, or wide snow attachment comes off and rides chained on its own — secured separately beats swinging on the coupler.
Over-range machines get a dispatcher’s custom price — the quote tells you honestly instead of showing a number we can’t stand behind. Call (414) 279-5510 and dispatch prices it person-to-person.
Answers reviewed July 2026 — pricing model, hours and ETAs are checked quarterly.
Jump back to the calculator — free, no phone call, and your quote reference (Q-XXXXXXXX) holds your place with dispatch.
Nearby
Need something else?
Every brand — Case, Cat, Kubota, Deere — hauled the same way.
Learn moreFull-size excavators — hauling, recovery & permits.
Learn moreOnto your trailer or off a carrier — winch and tilt deck.
Learn moreTrucks & heavy iron beyond the compact class.
Learn moreThe calculator prices the move in about 60 seconds — winch loading included if it’s dead — and a live dispatcher at (414) 279-5510 picks up your Q-reference. Contractors with recurring moves: ask about scheduled transports and consolidated billing.